Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3C13142-103 | Alternate P/N : 3C13142103 | Manufacturer : american general fabrication inc |
| Item Name: shaft straight | NSN: 3040-00-782-1916 (3040007821916) | CAGE Code: 1W160 |
| FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 3C13142-103 from American General Fabrication Inc which is described as a Shaft Straight component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3C13142-103 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040007821916 and was produced under the CAGE Code 1W160. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3C13142-103 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-782-1916 Item PartTypeName: SHAFT,STRAIGHT | 3040 | 007821916 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3C13142-103 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.410 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | CROSS DRILLED HOLE AND SPLINED STRAIGHT) |
| ABHP | OVERALL LENGTH | 10.187 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.2450 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.497 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.790 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.8125 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.0000 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.2700 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 15 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6372 ASSN STD SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions