Part No. : 2007405-35 | Alternate P/N : 200740535 | Manufacturer : apex manufacturing company inc |
Item Name: pin hollow | NSN: 5315-01-275-8484 (5315012758484) | CAGE Code: 2V343 |
If you require part number 2007405-35 from Apex Manufacturing Company Inc which is described as a Pin Hollow component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2007405-35 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315012758484 and was produced under the CAGE Code 2V343. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2007405-35 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2007405-35
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-01-275-8484 Item Description: Pin Hollow | 5315 | 012758484 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2007405-35 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AARX | INSIDE DIAMETER | 0.780 INCHES NOMINAL |
ACHT | PIN OVERALL LENGTH | 3.635 INCHES NOMINAL |
ACHU | PIN OVERALL DIAMETER | 0.9692 INCHES MINIMUM AND 0.9708 INCHES MAXIMUM |
CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
FEAT | SPECIAL FEATURES | TWO RAISED LIPS 0.080 IN. HIGH BY 0.220 IN. WIDE 180 DEGREES APART |
MATT | MATERIAL | STEEL COMP 300M OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6257 ASSN STD 1ST MATERIAL RESPONSE OR AMS-6419 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
SUPP | SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload