Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 91S2-22 | Alternate P/N : 91S222 | Manufacturer : arconic global fasteners and rings |
| Item Name: stud assembly turnlock fastener | NSN: 5325-00-085-4124 (5325000854124) | CAGE Code: 71286 |
If you require part number 91S2-22 from Arconic Global Fasteners And Rings which is described as a Stud Assembly Turnlock Fastener component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 91S2-22 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5325000854124 and was produced under the CAGE Code 71286. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 91S2-22 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5325-00-085-4124 Item PartTypeName: STUD ASSEMBLY,TURNLOCK FASTENER | 5325 | 000854124 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 91S2-22 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AATC | EXTENDED WASHER DIAMETER | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AGRD | TURNLOCK STUD HEAD STYLE | STUD HEAD |
| AGRE | STUD ASSEMBLY STYLE | STUD ASSEMBLY |
| AGRF | DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD | 1.103 INCHES NOMINAL |
| AGRJ | STUD DIAMETER | 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.665 INCHES MINIMUM AND 0.694 INCHES MAXIMUM |
| AKCV | DRIVE TYPE | SLOTTED |
| ASDB | WIDTH ACROSS FLATS | 0.552 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| CQYY | STUD HEAD HEIGHT | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions