Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : SW24770 | Manufacturer : atap inc | Item Name: motor hydraulic |
| NSN: 4320-01-366-9438 (4320013669438) | CAGE Code: 22638 | FSC: 4320 Power And Hand Pumps |
If you require part number SW24770 from Atap Inc which is described as a Motor Hydraulic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SW24770 which is listed under the Federal Supply Class 4320 Power And Hand Pumps. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4320013669438 and was produced under the CAGE Code 22638. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SW24770 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| SUPP | Supplementary Features | 18.4LBS; HYDRAULIC FLUID; OPERATING TEMPERATURE -40.0DEG F TO 125.0DEG F |
| ASMM | Connection Quantity | 1 |
| AFFL | Mounting Bolt Circle Diameter | 4.180 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| ANNL | Square End Length | 0.900 INCHES NOMINAL AND 0.820 INCHES NOMINAL |
| AXFQ | Constant Displacement Per Revolution | 10.600 CUBIC INCHES |
| ABTJ | Mounting Hole Quantity | 2 |
| ABUJ | Thread Size | 0.875-14 AND 0.438-20 |
| AWLS | Connection Type | INLET AND OUTLET AND DRAIN |
| AEQC | Operating Speed At Rated Capacity In Rpm | 328 |
| AAJF | Thread Direction | RIGHT-HAND |
| AJYP | Screw Thread Series Designator | UNF |
| AKCT | Shaft Rotation Direction | CLOCKWISE |
| FEAT | Special Features | HEX SHAFT BOTH ENDS; MOTOR 4.82IN.L,4.56IN.H,4.500IN.W; MTG FLANGE SAE A-2 BOLT,5.12IN.W; OTHER END EARS 2 PLACES 180.0DEG APART,WITH 0.500-13UNC-28THD HOLES; PORTS SAE 8 O-RING LOCATED ON TOP; 7/16-20UNF O-RING PLUG; |
| AAXX | Mounting Type | FLANGE |
| APJC | Thread Location | INTERNAL |
| AAZK | Width Across Flats | 0.750 INCHES NOMINAL |
| AXFB | Maximum Working Pressure Rating At Specified Temp Range | 2750.0PSI CONTINUOUS AND 3250.OPSI INTERMITTENT AT A KNOWN TEMPERATURE |
| AXFC | Connection Design | THREADED |
| AXFP | Displacement Type | CONSTANT |
| ABTB | Mounting Hole Diameter | 0.540 INCHES NOMINAL |
| AAPL | Torque Load Rating | 4081.0 INCH-POUNDS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions