Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : WS1-10-50 | Alternate P/N : WS11050 | Manufacturer : atlas corp |
| Item Name: spacer sleeve | NSN: 5365-00-025-6986 (5365000256986) | CAGE Code: 04169 |
| FSC: 5365 Bushings Rings Shims and Spacers |
If you require part number WS1-10-50 from Atlas Corp which is described as a Spacer Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number WS1-10-50 which is listed under the Federal Supply Class 5365 Bushings Rings Shims and Spacers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5365000256986 and was produced under the CAGE Code 04169. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part WS1-10-50 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-00-025-6986 Item PartTypeName: SPACER,SLEEVE | 5365 | 000256986 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 295925-50 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.1970 INCHES NOMINAL |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.9750 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F/A-18 AIRCRAFT |
| AGFF | FLANGE WIDTH | 0.0910 INCHES NOMINAL |
| BZLX | CORNER SHAPE | SQUARE ALL CORNERS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY) SPACER-FLANGED TUBULAR-ALUMINUM |
| FEAT | SPECIAL FEATURES | LELONGATED FLANGE 0.9850 INCHES NOMINAL LONG,0.3960 INCHES NOMINAL WIDE,TWO BOLT HOLES 0.0980 INCHES NOMINAL DIAMETER LOCATED 0.3430 INCHES NOMINAL FROM CENTER OF INSIDE DIAMETER TO CENTER OF BOLT HOLE EITHER END |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A.OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions