Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : WSI-10-125 | Alternate P/N : WSI10125 | Manufacturer : atlas corp |
| Item Name: spacer sleeve | NSN: 5365-01-293-9568 (5365012939568) | CAGE Code: 04169 |
| FSC: 5365 Bushings Rings Shims and Spacers |
If you require part number WSI-10-125 from Atlas Corp which is described as a Spacer Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number WSI-10-125 which is listed under the Federal Supply Class 5365 Bushings Rings Shims and Spacers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5365012939568 and was produced under the CAGE Code 04169. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part WSI-10-125 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-01-293-9568 Item PartTypeName: SPACER,SLEEVE | 5365 | 012939568 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HW-T0017-005 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.2450 INCHES MINIMUM AND 1.2550 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.1970 INCHES NOMINAL |
| AGFF | FLANGE WIDTH | 0.0910 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SLEEVE HAS AN ELONGATED FLANGE,0.9850 INCHES LONG,0.3960 INCHES WIDE TWO BOLT HOLES 0.0980INCHES NOMINAL DIAMETER LOCATED 0.3430 INCHES NOMINAL FROM CENTER OF INSIDE DIAMETER TO CENTER OF EITHER BOLT HOLE |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions