Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 30386-0043 | Alternate P/N : 303860043 | Manufacturer : avery weigh tronix llc |
| Item Name: tensiometer dial in | NSN: 6635-00-936-7227 (6635009367227) | CAGE Code: 17885 |
| FSC: 6635 Physical Properties Testing And Inspection |
If you require part number 30386-0043 from Avery Weigh Tronix Llc which is described as a Tensiometer Dial In component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 30386-0043 which is listed under the Federal Supply Class 6635 Physical Properties Testing And Inspection. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6635009367227 and was produced under the CAGE Code 17885. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 30386-0043 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| BHHY | DEFLECTION ANGLE ADJUSTER | NOT INCLUDED |
| AFJU | CARRYING CASE | NOT PROVIDED |
| BHHW | MATERIAL ACCOMMODATED DIAMETER | 0.250 INCHES NOMINAL |
| AMKD | INDICATOR TYPE | DIAL |
| AXGY | MOUNTING METHOD | BRACKET |
| FEAT | SPECIAL FEATURES | A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION ONE LBS INCREMENTS |
| APSJ | SCALE QUANTITY | 1 |
| APSK | SCALE RANGE | 0.0 TO 100.0 POUNDS |
| ASPX | SCALE NAME | COMPRESSION |
| FTLD | III FUNCTIONAL DESCRIPTION | LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATED OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM |
| BGTX | TEMPERATURE COMPENSATOR | NOT INCLUDED |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions