Part No. : 010234-012 | Alternate P/N : 010234012 | Manufacturer : bae systems information and electronic systems integration i |
Item Name: screw machine | NSN: 5305-00-777-6039 (5305007776039) | CAGE Code: 81413 |
FSC: 5305 Screws |
If you require part number 010234-012 from Bae Systems Information And Electronic Systems Integration I which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 010234-012 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007776039 and was produced under the CAGE Code 81413. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 010234-012 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 010234-012
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-777-6039 Item Description: Screw Machine | 5305 | 007776039 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
010234-012 | 1 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
MACHINE | AAJF | THREAD DIRECTIONRIGHT-HAND |
MACHINE | AASA | THREAD LENGTH0 138 INCHES MINIMUM AND 0 188 INCHES MAXIMUM |
MACHINE | AASK | HEAD STYLEFLAT COUNTERSUNK UNDERCUT |
MACHINE | CMLP | THREAD QUANTITY PER INCH40 |
MACHINE | CYAU | SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
MACHINE | THSD | THREAD SERIES DESIGNATORUNC |
MACHINE | AAJD | THREAD CLASS2A |
MACHINE | AASB | FASTENER LENGTH0 156 INCHES MINIMUM AND 0 188 INCHES MAXIMUM |
MACHINE | AASL | HEAD DIAMETER0 195 INCHES MINIMUM AND 0 225 INCHES MAXIMUM |
MACHINE | AASU | HEAD HEIGHT0 038 INCHES MINIMUM AND 0 047 INCHES MAXIMUM |
MACHINE | ABQZ | INTERNAL DRIVE STYLECROSS RECESS TYPE 1 |
MACHINE | AHYM | NOMINAL THREAD DIAMETER0 112 INCHES |
MACHINE | CQBC | MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH |
MACHINE | CRSQ | COUNTERSINK ANGLE80 0 DEGREES MINIMUM AND 82 0 DEGREES MAXIMUM |
MACHINE | CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES |
MACHINE | CYBA | SCREW SURFACE TREATMENTPASSIVATE |
MACHINE | CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload