Part No. : R3SSW5VC0-11 | Alternate P/N : R3SSW5VC011 | Manufacturer : barden corporation |
Item Name: bearing ball annular | NSN: 3110-00-293-9114 (3110002939114) | CAGE Code: 70854 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number R3SSW5VC0-11 from Barden Corporation which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number R3SSW5VC0-11 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110002939114 and was produced under the CAGE Code 70854. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part R3SSW5VC0-11 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. R3SSW5VC0-11
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-293-9114 Item Description: Bearing Ball Annular | 3110 | 002939114 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
R3ssw5vc0-11 | 2 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.1910 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 0.4999 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | PRESSED |
AGYK | SHIELD QUANTITY | 2 |
AGZC | LOAD DIRECTION | RADIAL |
AGZD | BORE SHAPE | STRAIGHT |
AKVV | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
FEAT | SPECIAL FEATURES | T0RQUE TESTED,INNER AND OUTER RING RUNOUT 0.0002 IN. |
LBMA | LUBRICATION MATERIAL | OIL |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL OVERALL |
STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload