Part No. : 99752 | Manufacturer : bell and howell phillipsburg co | Item Name: pin grooved headed |
NSN: 5315-00-291-2055 (5315002912055) | CAGE Code: 06650 |
If you require part number 99752 from Bell And Howell Phillipsburg Co which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 99752 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315002912055 and was produced under the CAGE Code 06650. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 99752 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 99752
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-291-2055 Item Description: Pin Grooved Headed | 5315 | 002912055 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | S | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
99752 | 6 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AASK | HEAD STYLE | FLAT |
ABMZ | DIAMETER | 0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
ABNZ | EFFECTIVE LENGTH | 0.118 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
ABPB | UNDER HEAD LENGTH | 0.164 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.019 INCHES MINIMUM AND 0.021 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.005 INCHES NOMINAL |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CRRG | PIN HEAD DIAMETER | 0.250 INCHES NOMINAL |
CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
HGTH | HEIGHT | 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | SILVER OVERALL AND RHODIUM OVERALL |
STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload