Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 204-010-767-001 | Alternate P/N : 204010767001 | Manufacturer : bell helicopter textron inc |
| Item Name: nut plain hexagon | NSN: 5310-00-674-4233 (5310006744233) | CAGE Code: 97499 |
| FSC: 5310 Nuts and Washers |
If you require part number 204-010-767-001 from Bell Helicopter Textron Inc which is described as a Nut Plain Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 204-010-767-001 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310006744233 and was produced under the CAGE Code 97499. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 204-010-767-001 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-674-4233 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 006744233 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 204-010-767-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.080 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.812 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
| CRSQ | COUNTERSINK ANGLE | 109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM FIRST END |
| CRSQ | COUNTERSINK ANGLE | 109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM SECOND END |
| FEAT | SPECIAL FEATURES | MAX SURFACE FINISH,ALL SURFACES 125 MICROINCH AA,COUNTERSINK ID T0 0.812 IN. DIA ON EACH SIDE |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 416,COND 4 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,COMP 4130,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OR PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OR BPS FW4007,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions