Part No. : MDD-452-4 | Alternate P/N : MDD4524 | Manufacturer : belshaw bros inc |
Item Name: shaft straight | NSN: 3040-01-413-2635 (3040014132635) | CAGE Code: 06793 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number MDD-452-4 from Belshaw Bros Inc which is described as a Shaft Straight component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MDD-452-4 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040014132635 and was produced under the CAGE Code 06793. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MDD-452-4 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MDD-452-4
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-01-413-2635 Item Description: Shaft Straight | 3040 | 014132635 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Mdd-452-4 | 5 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | TWO FLAT GROOVES |
ABHP | OVERALL LENGTH | 20.750 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | CUTTER,DOUGH-NIMITZ CLASS CVN (ATTACK AIRCRAFT CARRIER-NUCLEAR) |
AMDL | FIRST END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM |
AMDN | FIRST END SPLINE MINOR DIAMETER | 0.8470 INCHES MINIMUM |
AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.9990 INCHES MAXIMUM |
AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
AMJB | SECOND END GROOVED FLAT DEPTH | 0.125 INCHES NOMINAL |
BDSQ | FIRST END SPLINE QUANTITY | 5 |
FEAT | SPECIAL FEATURES | HAS 2 FLATS AT SECOND END .375 IN. WIDE,90 DEGREES OF EACH OTHER;3 FLATS NEAR CENTER PARALLEL TO BOTH SECOND END FLATS;1 WOODRUFF KEYWAY OFF CENTER |
MATT | MATERIAL | STEEL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload