Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 1017 | Manufacturer : bendix corp | Item Name: cylinder assembly hydraulic brak |
| NSN: 2530-00-391-3995 (2530003913995) | CAGE Code: 06840 |
If you require part number 1017 from Bendix Corp which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1017 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530003913995 and was produced under the CAGE Code 06840. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1017 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-391-3995 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 003913995 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3434 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 5.000 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 3.375 INCHES NOMINAL |
| AFLW | ACTUATION METHOD | DIRECT |
| AMDX | FIRST END HOLE DIAMETER | 0.5615 INCHES MINIMUM AND 0.5630 INCHES MAXIMUM ALL WORKING ENDS |
| AMPC | FIRST END THICKNESS AT MOUNTING HOLES | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM ALL WORKING ENDS |
| AMQZ | COMPRESSED LENGTH | 7.281 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 8.625 INCHES NOMINAL |
| BMWH | RESERVOIR TYPE | INTEGRAL |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | FILLER PLUG AND RUBBER BOOT |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.406 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| CLMT | PORT STYLE | GASKET SEAL SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.500 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| CLNB | PORT THREAD CLASS | 2B SINGLE PORT |
| CLNG | STOPLIGHT SWITCH THREAD SERIES DESIGNATOR | NPT |
| CLNM | STOPLIGHT SWITCH NOMINAL PIPE THREAD SIZE | 0.125 INCHES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions