Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3595 | Manufacturer : bendix corp | Item Name: cylinder assembly hydraulic brak |
| NSN: 2530-00-208-7095 (2530002087095) | CAGE Code: 06840 |
If you require part number 3595 from Bendix Corp which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3595 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530002087095 and was produced under the CAGE Code 06840. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3595 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-208-7095 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 002087095 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 404946C91 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 1.710 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.835 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.000 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.517 INCHES NOMINAL |
| AJFY | SEAT ANGLE IN DEG | 45.0 |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| AMQZ | COMPRESSED LENGTH | 3.650 INCHES NOMINAL |
| ASBP | BORE TYPE | STRAIGHT |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BBJX | MOUNTING POSITION | LEFT |
| CBBL | FEATURES PROVIDED | BLEEDER VALVES |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.312 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.555 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.625 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | INVERTED FLARE |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 |
| CLNB | PORT THREAD CLASS | 2B |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions