Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3M1262D3-3-4A | Alternate P/N : 3M1262D334A | Manufacturer : boeing company the |
| Item Name: screw close tolerance | NSN: 5305-01-505-5350 (5305015055350) | CAGE Code: 76301 |
| FSC: 5305 Screws |
If you require part number 3M1262D3-3-4A from Boeing Company The which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1262D3-3-4A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015055350 and was produced under the CAGE Code 76301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1262D3-3-4A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-505-5350 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015055350 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11853C3-3-4A | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.250 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR) |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions