Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 74A661147-2011 | Alternate P/N : 74A6611472011 | Manufacturer : boeing company the |
| Item Name: pin shoulder headless | NSN: 5315-01-117-3630 (5315011173630) | CAGE Code: 76301 |
If you require part number 74A661147-2011 from Boeing Company The which is described as a Pin Shoulder Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 74A661147-2011 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315011173630 and was produced under the CAGE Code 76301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 74A661147-2011 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-117-3630 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 011173630 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 74A661147-2011 | 6 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED AND COUNTERSUNK |
| AATR | SHANK LENGTH | 1.677 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 0.3735 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.3735 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.520 INCHES MINIMUM AND 3.530 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.266 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.166 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.045 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSJF | FIRST END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 8.0 MICROINCHES BOTH ENDS |
| CTBY | FIRST END COUNTERSINK DIAMETER | 0.125 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | UNDERCUT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions