Part No. : MS35240-74 | Alternate P/N : MS3524074 | Manufacturer : bosch rexroth corporation |
Item Name: screwmachine | NSN: 5305-00-984-7342 (5305009847342) | CAGE Code: D9182 |
FSC: 5305 Screws |
If you require part number MS35240-74 from Bosch Rexroth Corporation which is described as a Screwmachine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS35240-74 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009847342 and was produced under the CAGE Code D9182. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS35240-74 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS35240-74
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-984-7342 Item Description: Screw Machine | 5305 | 009847342 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms35240-74 | 1 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.750 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AGAV | END ITEM IDENTIFICATION | MRAP BUFFALO MK2A2 |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload