Part No. : CUP PT SLF LOCK MS51023-153 | Alternate P/N : CUPPTSLFLOCKMS51023153 | Manufacturer : bosch rexroth corporation |
Item Name: screwcapsockethead | NSN: 5305-01-371-8456 (5305013718456) | CAGE Code: D9182 |
FSC: 5305 Screws |
If you require part number CUP PT SLF LOCK MS51023-153 from Bosch Rexroth Corporation which is described as a Screwcapsockethead component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number CUP PT SLF LOCK MS51023-153 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013718456 and was produced under the CAGE Code D9182. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part CUP PT SLF LOCK MS51023-153 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. CUP PT SLF LOCK MS51023-153
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-371-8456 Item Description: Screwcapsockethead | 5305 | 013718456 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Cup Pt Slf Lock Ms51023-153 | 5 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 1.250 INCHES MINIMUM |
AASB | FASTENER LENGTH | 1.250 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT CHAMFER |
AASL | HEAD DIAMETER | 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
ASDB | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 20 |
CQFM | HARDNESS RATING | 95.0 ROCKWELL B MINIMUM OVERALL |
MATT | MATERIAL | STEEL COMP 316 OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
CQBC | MINIMUM TENSILE STRENGTH | 90000 POUNDS PER SQUARE INCH |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload