Part No. : 2-702 | Alternate P/N : 2702 | Manufacturer : bosch rexroth corporation |
Item Name: nut plain hexagon | NSN: 5310-00-616-8660 (5310006168660) | CAGE Code: D9182 |
FSC: 5310 Nuts and Washers |
If you require part number 2-702 from Bosch Rexroth Corporation which is described as a Nut Plain Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2-702 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310006168660 and was produced under the CAGE Code D9182. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2-702 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2-702
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-616-8660 Item Description: Nut Plain Hexagon | 5310 | 006168660 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2-702 | 1 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
ACTA | NUT STYLE | HEXAGON |
ADEA | NUT HEIGHT | 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
ASDB | WIDTH ACROSS FLATS | 0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
BZRR | THREAD SERIES | UNJC |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQJX | NOMINAL THREAD SIZE | 0.138 INCHES |
CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT |
CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload