Part No. : MS-16556-51 | Alternate P/N : MS1655651 | Manufacturer : bosch rexroth corporation |
Item Name: pin straight headless | NSN: 5315-00-891-5688 (5315008915688) | CAGE Code: D9182 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number MS-16556-51 from Bosch Rexroth Corporation which is described as a Pin Straight Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS-16556-51 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315008915688 and was produced under the CAGE Code D9182. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS-16556-51 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS-16556-51
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-891-5688 Item Description: Pin Straight Headless | 5315 | 008915688 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms-16556-51 | 2 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AAHP | SECOND END STYLE | RADIUS |
ACHT | PIN OVERALL LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
ACHU | PIN OVERALL DIAMETER | 0.2509 INCHES MINIMUM AND 0.2511 INCHES MAXIMUM |
ALWS | SECOND END CORNER RADIUS | 0.083 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.380 INCHES NOMINAL |
CBBL | FEATURES PROVIDED | CASEHARDENED |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM OVERALL AND 64.0 ROCKWELL C MAXIMUM OVERALL |
CQSX | SHEAR STRENGTH | 12800 DOUBLE POUND |
CRMG | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
FEAT | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25 DEG |
MATT | MATERIAL | STEEL OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload