Part No. : AN365-428A | Alternate P/N : AN365428A | Manufacturer : bosch rexroth corporation |
Item Name: nut self locking hexagon | NSN: 5310-00-877-5796 (5310008775796) | CAGE Code: D9182 |
If you require part number AN365-428A from Bosch Rexroth Corporation which is described as a Nut Self Locking Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AN365-428A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310008775796 and was produced under the CAGE Code D9182. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AN365-428A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. AN365-428A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-877-5796 Item Description: Nut Self Locking Hexagon | 5310 | 008775796 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
An365-428a | 1 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
AAWY | COUNTERBORE DIAMETER | 0.253 INCHES MINIMUM NUT AND 0.293 INCHES MAXIMUM NUT |
ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
ACTA | NUT STYLE | HEXAGON |
ADEA | NUT HEIGHT | 0.240 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
ASDB | WIDTH ACROSS FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
AZKQ | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
BZRR | THREAD SERIES | UNF |
CMLP | THREAD QUANTITY PER INCH | 28 |
CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES NOMINAL NUT |
CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
CSXL | BEARING SURFACE FINISH | 125.0 MICROINCHES |
MATT | MATERIAL | STEEL COMP 1006 NUT OR STEEL COMP 1008 NUT OR STEEL COMP 1009 NUT OR STEEL COMP 1010 NUT OR STEEL COMP 1015 NUT OR STEEL COMP 1018 NUT OR STEEL COMP 1035 NUT OR STEEL COMP 11L37 NUT OR STEEL COMP 1213 NUT OR STEEL COMP 12L14 NUT |
SFTT | SURFACE TREATMENT | CADMIUM NUT AND CHROMATE NUT |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload