Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 754-6249 | Alternate P/N : 7546249 | Manufacturer : bunker ramo corp |
| Item Name: resistor variable wire wound pre | NSN: 5905-00-925-4551 (5905009254551) | CAGE Code: 12205 |
| FSC: 5905 Resistors |
If you require part number 754-6249 from Bunker Ramo Corp which is described as a Resistor Variable Wire Wound Pre component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 754-6249 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905009254551 and was produced under the CAGE Code 12205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 754-6249 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-925-4551 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009254551 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 300-8811 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.87455 INCHES MINIMUM AND 1.8755 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.531 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0550 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.000 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 03538-77C7078001 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions