Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : WC9341 | Manufacturer : c e niehoff and co | Item Name: cylinder assembly hydraulic brak |
| NSN: 2530-00-594-5188 (2530005945188) | CAGE Code: 76761 |
If you require part number WC9341 from C E Niehoff And Co which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number WC9341 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530005945188 and was produced under the CAGE Code 76761. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part WC9341 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-594-5188 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 005945188 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| W9341 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | IRON,CAST |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 2.822 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.125 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| AJFY | SEAT ANGLE IN DEG | 42.0 SINGLE PORT |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| ASBP | BORE TYPE | STRAIGHT |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BBJX | MOUNTING POSITION | RIGHT |
| CBBL | FEATURES PROVIDED | BLEEDER VALVES AND RUBBER BOOT |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.312 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.500 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.625 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | INVERTED FLARE SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNS SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 SINGLE PORT |
| CLNB | PORT THREAD CLASS | 2B SINGLE PORT |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions