Part No. : ST3M466V7L9-1 | Alternate P/N : ST3M466V7L91 | Manufacturer : camcar llc |
Item Name: screw close tolerance | NSN: 5305-00-308-1806 (5305003081806) | CAGE Code: 4WL75 |
FSC: 5305 Screws |
If you require part number ST3M466V7L9-1 from Camcar Llc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ST3M466V7L9-1 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305003081806 and was produced under the CAGE Code 4WL75. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ST3M466V7L9-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. ST3M466V7L9-1
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-308-1806 Item Description: Screw Close Tolerance | 5305 | 003081806 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
St3m466v7l9-1 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.631 INCHES MINIMUM AND 0.681 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 1.203 INCHES MINIMUM AND 1.233 INCHES MAXIMUM |
AASK | HEAD STYLE | OVAL COUNTERSUNK |
AASL | HEAD DIAMETER | 0.662 INCHES MINIMUM AND 0.668 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
ANEE | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 20 |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
MATT | MATERIAL | TITANIUM ALLOY OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload