Part No. : 3M892-14D40 | Alternate P/N : 3M89214D40 | Manufacturer : camcar llc |
Item Name: bolt close tolerance | NSN: 5306-01-293-5325 (5306012935325) | CAGE Code: 4WL75 |
FSC: 5306 Bolts |
If you require part number 3M892-14D40 from Camcar Llc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M892-14D40 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306012935325 and was produced under the CAGE Code 4WL75. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M892-14D40 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M892-14D40
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-293-5325 Item Description: Bolt Close Tolerance | 5306 | 012935325 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m892-14d40 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.632 INCHES MINIMUM AND 0.662 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 3.142 INCHES MINIMUM AND 3.162 INCHES MAXIMUM |
AASK | HEAD STYLE | HEXAGON |
AASU | HEAD HEIGHT | 0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM |
AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM ALL HOLES AND 0.151 INCHES MAXIMUM ALL HOLES |
AHYM | NOMINAL THREAD DIAMETER | 0.875 INCHES |
ANEE | GRIP LENGTH | 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 14 |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.008 INCHES MINIMUM ALL HOLES AND 3.038 INCHES MAXIMUM ALL HOLES |
CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload