Part No. : 3M1275E3D13A | Manufacturer : camcar llc | Item Name: bolt close tolerance |
NSN: 5306-01-597-9669 (5306015979669) | CAGE Code: 4WL75 | FSC: 5306 Bolts |
If you require part number 3M1275E3D13A from Camcar Llc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1275E3D13A which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306015979669 and was produced under the CAGE Code 4WL75. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1275E3D13A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M1275E3D13A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-597-9669 Item Description: Bolt Close Tolerance | 5306 | 015979669 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m1275e3d13a | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | Thread Class | 3A |
ANEE | Grip Length | 0.806 INCHES NOMINAL |
AASK | Head Style | FLAT COUNTERSUNK |
CRHC | Hole Configuration Style | ROUND |
AASA | Thread Length | 0.315 INCHES NOMINAL |
AAUB | Hole Diameter | 0.070 INCHES NOMINAL |
THSD | Thread Series Designator | UNJF |
AASL | Head Diameter | 0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
AASB | Fastener Length | 1.121 INCHES MAXIMUM |
MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
BQDM | Hole Type | DRILLED |
SFTT | Surface Treatment | PASSIVATE OVERALL |
STDC | Surface Treatment Document And Classification | MIL-L-87132, TYPE I, CLASS B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
MATT | Material | NICKEL ALLOY 718 OVERALL |
MRC | Decoded Requirement | Clear Text Reply |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
AAUR | Grip Diameter | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 32 |
ASXK | Hole Quantity | 1 |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload