Part No. : 3M1277E6D7A | Manufacturer : camcar llc | Item Name: bolt close tolerance |
NSN: 5306-01-609-8341 (5306016098341) | CAGE Code: 4WL75 | FSC: 5306 Bolts |
If you require part number 3M1277E6D7A from Camcar Llc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1277E6D7A which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306016098341 and was produced under the CAGE Code 4WL75. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1277E6D7A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M1277E6D7A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-609-8341 Item Description: Bolt Close Tolerance | 5306 | 016098341 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m1277e6d7a | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | AA |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.563 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.503 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.5504 INCHES MINIMUM AND 0.5604 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.106 INCHES NOMINAL |
AAUR | GRIP DIAMETER | 0.3896 INCHES MINIMUM AND 0.3901 INCHES MAXIMUM |
AGAV | END ITEM IDENTIFICATION | F/A-18 E/F |
AHYM | NOMINAL THREAD DIAMETER | 0.3750 INCHES |
ANEE | GRIP LENGTH | 0.4375 INCHES NOMINAL |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | AJ |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSYT | CHAMFER ANGLE | 23.4 DEGREES NOMINAL |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, CLOSE TOLERANCE |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload