Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3D2219 | Manufacturer : caterpillar inc | Item Name: cylinder assembly hydraulic brak |
| NSN: 2530-00-428-5662 (2530004285662) | CAGE Code: 11083 | FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components |
If you require part number 3D2219 from Caterpillar Inc which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3D2219 which is listed under the Federal Supply Class 2530 Vehicular Brake Steering Axle Wheel and Track Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530004285662 and was produced under the CAGE Code 11083. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3D2219 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-428-5662 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 004285662 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FE29980 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 5.120 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.500 INCHES NOMINAL |
| AFLW | ACTUATION METHOD | DIRECT |
| AMQZ | COMPRESSED LENGTH | 7.910 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 9.350 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BMWH | RESERVOIR TYPE | INTEGRAL |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | FILLER PLUG AND RUBBER BOOT |
| CKSG | FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF |
| CKSH | FIRST PISTON ROD END THREAD DIAMETER | 0.438 INCHES NOMINAL |
| CKSJ | FIRST PISTON ROD END THREAD QUANTITY PER INCH | 20 |
| CKSK | FIRST PISTON ROD END THREAD CLASS | 2B |
| CKSL | FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND |
| CLML | MOUNTING TYPE AND LOCATION | BOSS CENTER SECTION |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.391 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 4.120 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| CLMT | PORT STYLE | GASKET SEAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMX | PORT THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 |
| CLNB | PORT THREAD CLASS | 2B |
| FEAT | SPECIAL FEATURES | PISTON ROD END THD FEMALE STYLE,1.000 IN.DEEP |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions