Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 2D4185 | Manufacturer : caterpillar inc | Item Name: generator engine accessory |
| NSN: 2920-00-605-0737 (2920006050737) | CAGE Code: 11083 | FSC: 2920 Engine Electrical System Components Nonaircraft |
If you require part number 2D4185 from Caterpillar Inc which is described as a Generator Engine Accessory component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2D4185 which is listed under the Federal Supply Class 2920 Engine Electrical System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920006050737 and was produced under the CAGE Code 11083. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2D4185 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-605-0737 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 006050737 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GRC2440C217 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.688 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 3.247 INCHES MINIMUM AND 3.249 INCHES MAXIMUM |
| ABGC | SLOT WIDTH | 0.531 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| ABGD | SLOT LENGTH | 1.219 INCHES NOMINAL |
| ABPT | SECOND STEP DIAMETER | 0.750 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 1.343 INCHES NOMINAL |
| ADER | MOUNTING STYLE | FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE |
| ADPY | PILOT HEIGHT | 0.822 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| AGAW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS | 3.625 INCHES NOMINAL |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.428 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 3000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 2300 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.484 INCHES NOMINAL |
| BCMJ | CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 5.875 INCHES NOMINAL |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 6000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| FEAT | SPECIAL FEATURES | SHIELDED TO PREVENT RADIO INTERFERENCE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions