Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 5S8183 | Manufacturer : caterpillar inc | Item Name: hose assembly nonmetallic |
| NSN: 4720-00-810-3231 (4720008103231) | CAGE Code: 11083 | FSC: 4720 Hose and Tubing Flexible |
If you require part number 5S8183 from Caterpillar Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 5S8183 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720008103231 and was produced under the CAGE Code 11083. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 5S8183 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-810-3231 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 008103231 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5S8183 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -67.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.906 INCHES NOMINAL |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.188 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER,CHLOROPRENE |
| CRXX | MEASURING METHOD AND LENGTH | 13.750 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.188 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE SAE FLANGED HEAD) 1ST END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE SAE FLANGED HEAD) 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CQBD | BURST TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 30.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND OIL RESISTANT AND CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 11083 HAVE INDICATED THIER PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions