Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 6G607 | Manufacturer : caterpillar inc | Item Name: pin grooved headed |
| NSN: 5315-01-169-8340 (5315011698340) | CAGE Code: 11083 |
If you require part number 6G607 from Caterpillar Inc which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 6G607 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315011698340 and was produced under the CAGE Code 11083. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 6G607 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-169-8340 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 011698340 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1243240 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| ABMZ | DIAMETER | 76.51 MILLIMETERS MINIMUM AND 76.63 MILLIMETERS MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 44.0 MILLIMETERS NOMINAL |
| ABPA | UNDERCUT DIAMETER | 72.57 MILLIMETERS NOMINAL |
| ABPB | UNDER HEAD LENGTH | 151.0 MILLIMETERS NOMINAL |
| ABPE | UNDERCUT RADIUS | 12.0 MILLIMETERS MINIMUM AND 14.0 MILLIMETERS MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 6.0 MILLIMETERS NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 94.0 MILLIMETERS NOMINAL |
| ANEE | GRIP LENGTH | 57.0 MILLIMETERS NOMINAL |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM SHANK |
| CRMG | FIRST END TAPER ANGLE | 20.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 89.05 MILLIMETERS MINIMUM AND 89.55 MILLIMETERS MAXIMUM |
| CSYM | SURFACE FINISH | 0.80 MICRONS SHANK END |
| CSYM | SURFACE FINISH | 1.6 MICRONS HEAD OUTSIDE DIAMETER |
| FEAT | SPECIAL FEATURES | 6.0 MM DIA HOLE ON SHAFT IS 21.0 MM MIN AND 24.0 MM MAX DEEP TWO HOLES ON HEAD BEARING SURFACE ARE 11.0 MM DIA AND 32.0 MM DEEP AND ARE TAPPED 0.500 IN. 13-2B UNC ONE HOLE ON HEAD BEARING SURFACE IS 8.5 MM MIN DIA AND 9.1 MM MAX DIA AND 95 |
| HGTH | HEIGHT | 32.0 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1045 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 1E361,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions