Part No. : MS21250-06048 | Alternate P/N : MS2125006048 | Manufacturer : chandler craftsman controls |
Item Name: bolt shear | NSN: 5306-00-177-5506 (5306001775506) | CAGE Code: 52628 |
FSC: 5306 Bolts |
If you require part number MS21250-06048 from Chandler Craftsman Controls which is described as a Bolt Shear component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS21250-06048 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306001775506 and was produced under the CAGE Code 52628. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS21250-06048 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS21250-06048
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-00-177-5506 Item Description: Bolt Shear | 5306 | 001775506 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms21250-06048 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.625 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 3.635 INCHES MINIMUM AND 3.655 INCHES MAXIMUM |
AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |
AASU | HEAD HEIGHT | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
AATC | EXTENDED WASHER DIAMETER | 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM |
AATD | EXTENDED WASHER THICKNESS | 0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
ANEE | GRIP LENGTH | 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES PRIMARY WASHER |
MATT | MATERIAL | STEEL OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload