Part No. : 8630-39-11I | Alternate P/N : 86303911I | Manufacturer : chief of engineers |
Item Name: collar shaft | NSN: 3040-00-776-1975 (3040007761975) | CAGE Code: 81336 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 8630-39-11I from Chief Of Engineers which is described as a Collar Shaft component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 8630-39-11I which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040007761975 and was produced under the CAGE Code 81336. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 8630-39-11I today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 8630-39-11I
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-776-1975 Item Description: Collar Shaft | 3040 | 007761975 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
8630-39-11i | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AATE | CHAMFER ANGLE IN DEG | 45.0 |
ABKV | OUTSIDE DIAMETER | 2.375 INCHES NOMINAL |
ABNM | THICKNESS | 1.062 INCHES NOMINAL |
AEUZ | LARGEST DIAMETER LENGTH | 0.812 INCHES NOMINAL |
AHYF | SECURING HOLE QUANTITY | 4 |
AHYG | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 |
CQBP | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNC |
CQKB | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE |
CRWB | NOMINAL THREAD SIZE AND LOCATION | 0.250 INCHES SINGLE HOLE |
MATT | MATERIAL | STEEL |
SFTT | SURFACE TREATMENT | ZINC |
STYL | STYLE DESIGNATOR | ROUND W/DOUBLE CHAMFER |
ABXV | BORE DIAMETER | 1.3770 INCHES MINIMUM AND 1.3810 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | SECURING HOLES ARE EQUALLYSPACED ACROSS THK OF COLLAR AT 0.062 IN. INTERVALS AFTER 1ST HOLE CENTERLINE IS POSITIONED 0.438 IN. FROM EITHER EDGE OF THK |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload