Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HL23-5-7 | Alternate P/N : HL2357 | Manufacturer : classic medallics inc |
| Item Name: pin rivet | NSN: 5320-00-959-7328 (5320009597328) | CAGE Code: 58868 |
| FSC: 5320 Rivets |
If you require part number HL23-5-7 from Classic Medallics Inc which is described as a Pin Rivet component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HL23-5-7 which is listed under the Federal Supply Class 5320 Rivets. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5320009597328 and was produced under the CAGE Code 58868. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HL23-5-7 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-959-7328 Item PartTypeName: PIN-RIVET | 5320 | 009597328 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HL23-5-7 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.064 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET,STRAIGHT,THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.287 INCHES MINIMUM AND 0.292 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.443 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES |
| CQSX | SHEAR STRENGTH | 1760 DOUBLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED OVERALL |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions