Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 75A650006-2005 | Alternate P/N : 75A6500062005 | Manufacturer : cm manufacturing inc |
| Item Name: pin shoulder headless | NSN: 5315-01-313-8744 (5315013138744) | CAGE Code: 6Z056 |
If you require part number 75A650006-2005 from Cm Manufacturing Inc which is described as a Pin Shoulder Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 75A650006-2005 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315013138744 and was produced under the CAGE Code 6Z056. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 75A650006-2005 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-313-8744 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 013138744 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 75A650006-2005 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | SQUARE |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVH | SHOULDER DIAMETER | 1.375 INCHES NOMINAL |
| AAZE | SHANK DIAMETER | 0.375 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.626 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.298 INCHES MINIMUM AND 0.308 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.113 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.191 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.046 INCHES MINIMUM AND 0.076 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CQTR | SECOND SHANK DIAMETER | 0.9980 INCHES MINIMUM AND 0.9985 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES SHOULDER OUTSIDE DIAMETER |
| CWAS | SECOND SHANK LENGTH | 1.800 INCHES MINIMUM AND 1.805 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL UNS K23080 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions