Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : J950112-6 | Alternate P/N : J9501126 | Manufacturer : con vel inc |
| Item Name: shaft axle automotive | NSN: 2520-00-734-6984 (2520007346984) | CAGE Code: 13038 |
| FSC: 2520 Vehicle Power Transmission Components |
If you require part number J950112-6 from Con Vel Inc which is described as a Shaft Axle Automotive component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number J950112-6 which is listed under the Federal Supply Class 2520 Vehicle Power Transmission Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2520007346984 and was produced under the CAGE Code 13038. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part J950112-6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-734-6984 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 007346984 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2520-00-734-6984 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.122 INCHES MINIMUM AND 2.127 INCHES MAXIMUM |
| AMEL | FIRST END BEARING SEAT DIAMETER | 2.125 INCHES MINIMUM AND 2.127 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.949 INCHES MINIMUM AND 1.961 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTC | FIRST END FACILITY WIDTH | 0.156 INCHES NOMINAL |
| BNTD | FIRST END FACILITY LOCATION | 0.375 IN. FROM SHAFT END |
| BNTG | FIRST END BEARING SEAT WIDTH | 0.942 INCHES MINIMUM AND 0.952 INCHES MAXIMUM |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL COMP 4150H |
| ABHP | OVERALL LENGTH | 34.688 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 39.0 MINIMUM ROCKWELL C AND 43.0 MAXIMUM ROCKWELL C |
| AMDM | FIRST END SPLINE LENGTH | 2.719 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.949 INCHES MINIMUM AND 1.961 INCHES MAXIMUM |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 4.985 INCHES MINIMUM AND 4.995 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 2.000 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.122 INCHES MINIMUM AND 2.127 INCHES MAXIMUM |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.695 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 4150H ASSN STD SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions