FDI-SGFC-0250 by Cox Flow Measurement Inc With NSN 6695-01-461-9144

Part No. : FDI-SGFC-0250	Alternate P/N : FDISGFC0250	Manufacturer : cox flow measurement inc
Item Name: calibration set sec	NSN: 6695-01-461-9144 (6695014619144)	CAGE Code: 0U3B5
FSC: 6695 Combination And Miscellaneous Instruments

If you require part number FDI-SGFC-0250 from Cox Flow Measurement Inc which is described as a Calibration Set Sec component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number FDI-SGFC-0250 which is listed under the Federal Supply Class 6695 Combination And Miscellaneous Instruments. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6695014619144 and was produced under the CAGE Code 0U3B5. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part FDI-SGFC-0250 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for FDI-SGFC-0250

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Characteristics Data of NSN 6695-01-461-9144, 6695014619144

MRC	Criteria	Characteristic
SUPP	Supplementary Features	THE SGFC IS A COMPLETELY AUTOMATED CALIBRATION TRANSFER STANDARD SYS, DESIGNED FOR CALIBRATION OF GAS FLOW METERS. IT UTILIZES SONIC NOZZLES, TEMP,AND PRESSURE TRANSDUCERS; PNEUMATIC CONTROL VALVES AND A PERSONAL COMPUTER TO SET, MONITOR AND CONTROL CALIBRATOR FLOW RATE. THE SYS INCORPORATES TEMP, DEFFERENTIAL PRESSURE AND PRESSURE TRANSOUCERS; ALONG WITH SPECIALIZED DATA ACQUISITION DEVICES FOR UUT ANLOG OR FREQUENCEY OUTPUTS FLOW-CAL SOFTWARE THATWILL CONTROL ALL OPERATION
FEAT	Special Features	FLOW RANGE: 0.0105 SCFM TO 250 SCFM; OPERATING FLUID TYPES: AIR NITROGEN; COMPENSATED FLUID TYPS: HELIUM, OXYGEN, CARBON DIOXIDE; OPERATING TEMPERATURE RANGE: FLOWING GAS STREM,60-90 DEG F. ELECTRONICS/TRANSDUCERS EVIRONMENT: 70 DEG PORM 20 DEG F; OUTPUTS: COMMUNICATIONS, RS-232C OR IEEE 488; DISPLAY: 20 CHARACTER X2 LINE; ACCURACY: PORM 0.35% READING @ 1 STANDARD DEVIATION. POWER REQUIREMENTS: 115VAC/60HZ/2AMP; AIR SUPPLY: 120 PSIA REGULATED SOURCE 250SCFM
MRC	Decoded Requirement	Clear Text Reply