Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : RD17675-1 | Alternate P/N : RD176751 | Manufacturer : crane corp |
| Item Name: shaft shouldered | NSN: 3040-01-026-3014 (3040010263014) | CAGE Code: 51663 |
If you require part number RD17675-1 from Crane Corp which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number RD17675-1 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040010263014 and was produced under the CAGE Code 51663. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part RD17675-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-026-3014 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 010263014 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RD17675-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHG | FIRST END GROOVE WIDTH | 0.0500 INCHES MINIMUM AND 0.0540 INCHES MAXIMUM |
| AAHH | FIRST END GROOVE DIAMETER | 0.3500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | SPLINED STRAIGHT) |
| ABHP | OVERALL LENGTH | 1.342 INCHES MINIMUM AND 1.345 INCHES MAXIMUM |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.604 INCHES MINIMUM AND 0.612 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.3747 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.2409 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| BDSR | SECOND END SPLINE QUANTITY | 8 |
| CSPY | LARGEST STEP DIAMETER | 0.3747 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | DISTANCE BETWEEN HOLE CENTERS 0.280 IN. MIN,0.285 IN. MAX |
| MATT | MATERIAL | STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions