Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : J50-12 | Alternate P/N : J5012 | Manufacturer : crompton and knowles corp |
| Item Name: pin shoulder headless | NSN: 5315-00-292-4087 (5315002924087) | CAGE Code: 56821 |
| FSC: 5315 Nails Machine Keys and Pins |
If you require part number J50-12 from Crompton And Knowles Corp which is described as a Pin Shoulder Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number J50-12 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315002924087 and was produced under the CAGE Code 56821. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part J50-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-292-4087 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 002924087 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| J50-12 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | CHAMFERED |
| AATR | SHANK LENGTH | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.873 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.755 INCHES MINIMUM AND 0.758 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.420 INCHES MINIMUM AND 3.440 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | CASEHARDENED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | SHANK END |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1117 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions