Part No. : 914122433-001 | Alternate P/N : 914122433001 | Manufacturer : cubic simulation systems inc |
Item Name: bearing ball linear motion | NSN: 3110-01-304-9590 (3110013049590) | CAGE Code: 54206 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 914122433-001 from Cubic Simulation Systems Inc which is described as a Bearing Ball Linear Motion component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 914122433-001 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110013049590 and was produced under the CAGE Code 54206. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 914122433-001 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 914122433-001
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-304-9590 Item Description: Bearing Ball Linear Motion | 3110 | 013049590 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
914122433-001 | 5 | 2 | 7 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 1.6250 INCHES NOMINAL |
ADGA | OVERALL OUTSIDE DIAMETER | 1.2496 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
AGYE | SURFACE FINISH | GROUND |
AGYJ | SEAL QUANTITY | 2 |
AGZD | BORE SHAPE | STRAIGHT |
CTMM | WORKING BORE DIAMETER | 0.7495 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM |
CTMR | DISTANCE BETWEEN RETAINING RINGS | 1.0470 INCHES MINIMUM AND 1.0770 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | POLYURETHANE SHAFT WIPER ON BOTH ENDS |
MATT | MATERIAL | PLASTIC POLYURETHANE SEAL |
MATT | MATERIAL | STEEL BALL |
MATT | MATERIAL | STEEL RETAINER |
AGZA | ALIGNMENT TYPE | RIGID |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload