Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 137465 | Manufacturer : curtiss wright controls inc | Item Name: coupling shaft rigid |
| NSN: 3010-00-640-2653 (3010006402653) | CAGE Code: 0AHP5 |
If you require part number 137465 from Curtiss Wright Controls Inc which is described as a Coupling Shaft Rigid component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 137465 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3010006402653 and was produced under the CAGE Code 0AHP5. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 137465 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-640-2653 Item PartTypeName: COUPLING,SHAFT,RIGID | 3010 | 006402653 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 132050 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUH | SPLINE MINOR DIAMETER | 1.1250 INCHES MINIMUM BOTH ENDS AND 1.1300 INCHES MAXIMUM BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 1.2990 INCHES MINIMUM BOTH ENDS AND 1.3190 INCHES MAXIMUM BOTH ENDS |
| ABHP | OVERALL LENGTH | 1.460 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 19 FIRST END |
| ABXV | BORE DIAMETER | 0.8440 INCHES MINIMUM BOTH ENDS AND 0.8450 INCHES MAXIMUM BOTH ENDS |
| ADAV | OVERALL DIAMETER | 2.828 INCHES MINIMUM AND 2.833 INCHES MAXIMUM |
| ADGE | BORE LENGTH | 0.5350 INCHES MINIMUM BOTH ENDS AND 0.5450 INCHES MAXIMUM BOTH ENDS |
| AGAV | END ITEM IDENTIFICATION | SHAFT,DRIVE,ENGINE,GASOLINE RECIPROCATING,AIRCRAFT |
| AGZD | BORE SHAPE | STRAIGHT FIRST END |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.000 FIRST END |
| AXFH | SPLINE LENGTH | 0.755 INCHES MINIMUM BOTH ENDS AND 0.765 INCHES MAXIMUM BOTH ENDS |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| FEAT | SPECIAL FEATURES | FLANGE WIDTH 0.960 IN. NOMINAL PITCH DIAMETER 0.196 IN. NOMINAL BORE SHAPE IS STRAIGHT AND SPLINED HUB DIAMETER 1.030 IN. NOMINAL END DIAMETER 1.540 IN. NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions