Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 12418004-002 | Alternate P/N : 12418004002 | Manufacturer : d w industries inc |
| Item Name: hose assembly nonmetallic | NSN: 4720-01-469-9208 (4720014699208) | CAGE Code: 0TE27 |
| FSC: 4720 Hose and Tubing Flexible |
If you require part number 12418004-002 from D W Industries Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 12418004-002 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720014699208 and was produced under the CAGE Code 0TE27. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 12418004-002 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-469-9208 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014699208 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12418004-002 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKV | Outside Diameter | 0.278 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| CRWL | Inside Surface Condition | SMOOTH |
| AAJD | Thread Class | 2B 1ST END |
| CQGM | Maximum Operating Pressure | 1500.0 POUNDS PER SQUARE INCH |
| ABJH | Temp Rating | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRDW | Hydrostatic Test Pressure | 5000.0 POUNDS PER SQUARE INCH |
| AGAV | End Item Identification | NSN2320-01-447-6345 |
| ACKH | Minimum Inside Bending Radius | 2.000 INCHES |
| AARX | Inside Diameter | 0.171 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CQBD | Burst Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| MEDA | Media For Which Designed | HYDRAULIC FLUID AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CQJX | Nominal Thread Size | 0.4375 INCHES 1ST END |
| CRXX | Measuring Method And Length | 23.800 INCHES MINIMUM OVERALL AND 24.200 INCHES MAXIMUM OVERALL |
| CQCS | Layer Composition And Location | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | Thread Series Designator | UNF 1ST END |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions