Part No. : XM60202 | Manufacturer : daimler chrysler corp | Item Name: housing bearing unit |
NSN: 3130-01-063-5845 (3130010635845) | CAGE Code: 12204 | FSC: 3130 Bearings Mounted |
If you require part number XM60202 from Daimler Chrysler Corp which is described as a Housing Bearing Unit component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number XM60202 which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130010635845 and was produced under the CAGE Code 12204. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part XM60202 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. XM60202
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3130-01-063-5845 Item Description: Housing Bearing Unit | 3130 | 010635845 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Xm60202 | 6 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABKG | BOLT CIRCLE DIAMETER | 10.875 INCHES NOMINAL |
ABKU | FLANGE THICKNESS | 0.620 INCHES NOMINAL |
ABXV | BORE DIAMETER | 5.9975 INCHES MINIMUM AND 5.9990 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 12.250 INCHES NOMINAL |
AFWB | HOUSING DIAMETER | 5.880 INCHES NOMINAL |
AFWD | HOUSING LENGTH | 3.120 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 TANK,ARMORED,BATTLE,M1A1 |
CMLP | THREAD QUANTITY PER INCH | 11 |
CQJX | NOMINAL THREAD SIZE | 0.625 INCHES |
CTTC | THREAD TOLERANCE CLASS | 2B INTERNAL |
CWJW | MOUNTING HOLE TYPE | ROUND, THREADED |
FEAT | SPECIAL FEATURES | BURRS AND SHARP EDGES REMOVED. QUENCHED AND TEMPERED TO HARDNESS 32/38 RC. THREADED MOUNTING HOLES FOR 2 EA 180 DEG APART. PERIPHERAL FLATS FOR 2 EA 180 DEG APART. RADII FOR 4 EA 90 DEG APART LOCATED AT INSIDE DIA TO DEPTHOF 0.310 IN NOM |
MATT | MATERIAL | STEEL COMP 4140 OVERALL |
STYL | STYLE DESIGNATOR | FLANGE BLOCK |
TEST | TEST DATA DOCUMENT | 19207-12274444 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload