Part No. : 35-118-2 | Alternate P/N : 351182 | Manufacturer : dana corporation |
Item Name: gasket | NSN: 5330-00-350-2945 (5330003502945) | CAGE Code: 95019 |
FSC: 5330 Packing and Gasket Materials |
If you require part number 35-118-2 from Dana Corporation which is described as a Gasket component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 35-118-2 which is listed under the Federal Supply Class 5330 Packing and Gasket Materials. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5330003502945 and was produced under the CAGE Code 95019. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 35-118-2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 35-118-2
MRC | Criteria | Characteristic |
---|---|---|
AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
AAUB | HOLE DIAMETER | 0.344 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 6.125 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 3.625 INCHES NOMINAL |
ADPQ | INSIDE CORNER RADIUS | 0.312 INCHES NOMINAL |
ADPW | OUTSIDE CORNER RADIUS | 0.750 INCHES NOMINAL |
ADUE | APERTURE WIDTH | 2.375 INCHES NOMINAL |
ADUF | APERTURE LENGTH | 4.875 INCHES NOMINAL |
ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.812 INCHES NOMINAL |
ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.750 INCHES NOMINAL |
ADVM | CROSS-SECTIONAL THICKNESS | 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM |
AECS | BOLT HOLE QUANTITY | 6 |
FEAT | SPECIAL FEATURES | CENTERLINE OFALL BOLT HOLES LOCATED 0.312 IN.FROMOUTSIDE EDGE OF GASKET |
MATT | MATERIAL | PAPER OVERALL AND GLUE OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL |
STYL | STYLE DESIGNATOR | NON-CIRCULAR |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload