Part No. : 111748 | Manufacturer : dana off highway products llc | Item Name: tie rod end steering |
NSN: 2530-00-587-6717 (2530005876717) | CAGE Code: 77237 |
If you require part number 111748 from Dana Off Highway Products Llc which is described as a Tie Rod End Steering component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 111748 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530005876717 and was produced under the CAGE Code 77237. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 111748 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 111748
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2530-00-587-6717 Item Description: Tie Rod End Steering | 2530 | 005876717 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
111748 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.625 INCHES NOMINAL |
ABND | TAPER LENGTH | 0.750 INCHES NOMINAL |
ABUJ | THREAD SIZE | 1/2-20 |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
APGF | DESIGN TYPE | BALL STUD |
AQZK | REMOVABILITY FEATURE | NOT INCLUDED |
CFCD | BALL STUD | INCLUDED |
CFCF | TAPERED BEARING SURFACE MAJOR DIAMETER | 0.625 INCHES NOMINAL |
CFCL | ROD CONNECTING END THREAD LOCATION | EXTERNAL |
CFCM | ROD CONNECTING END THREAD SIZE | 11/16-18 |
CFCN | ROD CONNECTING END THREAD SERIES DESIGNATOR | UNS |
CFCP | ROD CONNECTING END THREAD DIRECTION | RIGHT-HAND |
CFCQ | ROD CONNECTING END THREAD LENGTH | 2.125 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | FURN W/RUBBER BOLT,SLOTTED HEX NUT STUD AND DRILLED 1/8 IN. DIA HOLE,BODY DRILL AND TAPPED 3/16 IN. DIA FOR LUBE FITTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload