M2HCS3L by Danfoss Ltd With NSN 4320-00-494-5635

Part No. : M2HCS3L	Manufacturer : danfoss ltd	Item Name: motor hydraulic
NSN: 4320-00-494-5635 (4320004945635)	CAGE Code: 24976

If you require part number M2HCS3L from Danfoss Ltd which is described as a Motor Hydraulic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number M2HCS3L which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4320004945635 and was produced under the CAGE Code 24976. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part M2HCS3L today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for M2HCS3L

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Characteristics Data of NSN 4320-00-494-5635, 4320004945635

MRC	Criteria	Characteristic
AJAB	DRIVE SHAFT TYPE	KEYED
ABTJ	MOUNTING HOLE QUANTITY	2
AKCT	SHAFT ROTATION DIRECTION	COUNTERCLOCKWISE
ABWV	SHAFT DIAMETER	0.750 INCHES NOMINAL
AXFN	MOUNTING GOVERNMENT STANDARD	NONE
AZFG	MOUNTING BOLT HOLE SPACING	4.187 IN. C TO C
AJLF	HOUSING MATERIAL	IRON, CAST
AAPL	TORQUE LOAD RATING	30.4 INCH-POUNDS
AAST	KEY LENGTH	1.125 INCHES NOMINAL
AXFB	MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE	1500 AT 140 DEG F
AXFE	KEY HEIGHT	0.187 INCHES NOMINAL
ABSF	KEY WIDTH	0.187 INCHES NOMINAL
AXFM	DRIVE SHAFT GOVERNMENT STANDARD	NONE
AXFP	DISPLACEMENT TYPE	CONSTANT
AXFQ	CONSTANT DISPLACEMENT PER REVOLUTION	1.530 CUBIC INCHES
ABTB	MOUNTING HOLE DIAMETER	0.438 INCHES NOMINAL
AAXX	MOUNTING TYPE	FLANGE
ARQA	SHAFT PROTRUSION LENGTH	2.718 INCHES NOMINAL
AEQC	OPERATING SPEED AT RATED CAPACITY IN RPM	1200.0