Part No. : TY24306 | Manufacturer : deere and company | Item Name: generator engine accessory |
NSN: 2920-01-103-8052 (2920011038052) | CAGE Code: 75755 | FSC: 2920 Engine Electrical System Components Nonaircraft |
If you require part number TY24306 from Deere And Company which is described as a Generator Engine Accessory component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TY24306 which is listed under the Federal Supply Class 2920 Engine Electrical System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920011038052 and was produced under the CAGE Code 75755. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TY24306 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TY24306
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2920-01-103-8052 Item Description: Generator Engine Accessory | 2920 | 011038052 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ty24306 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
ADER | MOUNTING STYLE | FLANGE MTD W/TWO MTG HOLES, TOP HOLE THREADED |
AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
AXHX | GROUND POLARITY TYPE | NEGATIVE |
BCGF | III MAXIMUM OUTPUT CURRENT RATING IN AMPS | 35.0 |
BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED |
BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.281 INCHES NOMINAL |
BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.235 INCHES NOMINAL |
BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
CMLL | MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
CMLN | MOUNTING HOLE THREAD CLASS | 2B |
ELEC | VOLTAGE IN VOLTS | 12.0 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload