Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 85H14 | Manufacturer : department of the air force | Item Name: bolt close tolerance |
| NSN: 5306-00-144-4045 (5306001444045) | CAGE Code: 80049 | FSC: 5306 Bolts |
If you require part number 85H14 from Department Of The Air Force which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 85H14 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306001444045 and was produced under the CAGE Code 80049. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 85H14 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-144-4045 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 001444045 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN175H14A | 3 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.532 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 1.594 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.070 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 1.062 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 A |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions