Part No. : DIN963-M8X20-8 8-A2L | Alternate P/N : DIN963M8X2088A2L | Manufacturer : din deutsches institut fuer |
Item Name: screw machine | NSN: 5305-01-157-1359 (5305011571359) | CAGE Code: D8286 |
FSC: 5305 Screws |
If you require part number DIN963-M8X20-8 8-A2L from Din Deutsches Institut Fuer which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DIN963-M8X20-8 8-A2L which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305011571359 and was produced under the CAGE Code D8286. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DIN963-M8X20-8 8-A2L today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. DIN963-M8X20-8 8-A2L
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-157-1359 Item Description: Screw Machine | 5305 | 011571359 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Din963-M8x20-8 8-A2l | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 17.5 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM |
AASB | FASTENER LENGTH | 20.00 MILLIMETERS NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 14.5 MILLIMETERS NOMINAL |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
AHYM | NOMINAL THREAD DIAMETER | 8.0 MILLIMETERS |
CQBC | MINIMUM TENSILE STRENGTH | 113784 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM |
CQQR | THREAD PITCH IN MILLIMETERS | 1.25 |
CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL |
CYAU | SCREW MATERIAL | STEEL PROPERTY CLASS 8.8 |
CYBA | SCREW SURFACE TREATMENT | ZINC |
THSD | THREAD SERIES DESIGNATOR | M |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload