Part No. : E20301 | Manufacturer : draeger safety ag and co kgaa | Item Name: setscrew |
NSN: 5305-00-951-3169 (5305009513169) | CAGE Code: C5810 | FSC: 5305 Screws |
If you require part number E20301 from Draeger Safety Ag And Co Kgaa which is described as a Setscrew component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number E20301 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009513169 and was produced under the CAGE Code C5810. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part E20301 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. E20301
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-951-3169 Item Description: Setscrew | 5305 | 009513169 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
E20301 | 3 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.188 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.188 INCHES NOMINAL |
AASK | HEAD STYLE | HEADLESS (SETSCREW) |
AAUH | SPLINE MINOR DIAMETER | 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
AAUK | SPLINE WIDTH | 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |
ABQJ | POINT STYLE | OVAL |
ABQZ | INTERNAL DRIVE STYLE | SIX SPLINE |
AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
CMLP | THREAD QUANTITY PER INCH | 40 |
MATT | MATERIAL | STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload